Products
ACM No-Girder Arch Roof Forming Machine SX-ACM-1000-400
Five Advantages Of Products
- The effective length is measured by two kinds of instruments: electronic or mechanical.
- The rollers are all made of high quality structural steel, refined and forged, and the surface is plated with hard chromium, high hardness and long life of the roll.
- The bending adjustment of arch plate adopts power handwheel and counter, which is easy to operate and ensures the accuracy of quality and size.
- The spreader is light (30KG for American spreader and 2KG for our company), it is easy to load and unload, and the hoisting speed is fast.
- The press section is equipped with automatic transmission color steel plate power device, can be pressed 0.5~1.5 mm thick color steel plate, when pressing without frequent adjustment of roll pressure gap due to the change of sheet thickness, to ensure the normal production of color plate without scratching film, like
Product Details
ACM No-Girder Arch Roof Forming Machine SX-ACM-1000-400
Feeding width: 1000 mm
Effective width: 400 mm
Usage Rate: 40%
Applicable coil thickness: 0.8-1.5mm
Applicable span: ≤ 40 m
The company produces ACM arch board equipment products
ACM No-Girder Arch Roof Forming Machine
Kspan machine, super kspan machine, mic120, mic240, ABM machine, ABM120, ABM240, arch roof machine, China kspan machine, mobile building machine, Chinese kspan machine, kspan machine made in china, Roll forming machine, forming machine, arch span machine, seamless machine, no girder arch roof machine, kspan, hangar machine
This machine is used for on-site working, and the K-span roll forming machine is often found in construction of warehouses, workshops, airline hangars, ship yards, vehicle factories, and highway guardrails.
Application:
This machine is used for on-site working, and the K-span roll forming machine is often found in construction of warehouses, workshops, airline hangars, ship yards, vehicle factories, and highway guardrails.
Introduction
The ABM quick span machine consists of two parts: the forming part and the arching section. These two parts are placed on a mobile frame to move from place to place, earning it the nickname of a mobile factory.
Main Technical Specification of SX-1000-400 K Q Span Machine
1. Length: Approx. 10.3 m
2. Width: Approx. 2.25 m
3. Height: Approx. 2.30 m
4. Weight: Approx. 13000kg
5. Axle: Three axles, six tires
6. Wheel/tires: Standard
7. Towing: adjustable draw bar height from 80mm-160mm with 80mm round hitch.
8. Lighting System: Easily adaptable lighting
9. Drive System: All hydraulic
10. Fuel tank capacity: 68 liters
11. Construction: All steel and burnished aluminum construction, precision forming rollers with hard chrome plating.
12. De-coiling Device: 508 mm inside diameter, 5000kg capacity
13. Plant: Premium urethane enamel over epoxy primer (white) with buyers' markings on top and side covers
14. Panel forming speed: Approx. 15 meters/min
15. Curving Speed: Approx. 13 meters/min
16. Seaming Speed: Approx. 6 meters/min
17. Tables Four legs, with rollers, stand separately
18. Minimum Radius: 3.65 meters
19. Steel Coil Capacity: 1.2 mm nominal ASTM 653 Grade 50, 1.5 mm maximum thickness, 0.80 mm minimum thickness
20. Maximum Building Size: 40 meters wide, widths are calculated using liberal code parameters from the International Building Code
Yingkou Sanxing Group
Contact Person: Rebecca Wang
Telephone: +86-13941746206
Landline: +86-417-2604444
Company Address: No.69 Hailan Street, Yingkou Area of China (Liaoning) Pilot Free Trade Zone
Factory Address: No.69 Hailan Street, Yingkou Area of China (Liaoning) Pilot Free Trade Zone
Website: www.sxmanufacturer.com
Previous: ACM No-Girder Arch Roof Forming M...
Inquiry :
